Configuring Acls (Web); Ip Acl Configuration - Dell PowerConnect 8024 User Configuration Manual

Configuring ACLs (Web)

This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring ACLs on a
PowerConnect 8000-series and 8100-series switches. For details about the
fields on a page, click

IP ACL Configuration

Use the IP ACL Configuration page to add or remove IP-based ACLs.
To display the IP ACL Configuration page, click Switching → Network
Security → Access Control Lists → IP Access Control Lists → Configuration
in the navigation panel.
Figure 21-1. IP ACL Configuration
Adding an IPv4 ACL
To add an IPv4 ACL:
1 Open the IP ACL Configuration page.
2 Click Add to display the Add IP ACL page.
3 Specify an ACL name.
508
Configuring Access Control Lists
at the top of the page.