Dell PowerConnect 8024 User Configuration Manual page 726

Command
mac address-table
multicast forbidden
vlan-id
address vlan
mac-multicast-address
{
ip-multicast-address
|
{add | remove}
interface-list
interface
mac address-table
multicast forbidden
forward-unregistered
vlan-id
vlan
mac address-table
multicast forward-all
vlan-id
vlan
mac address-table
multicast forward-
unregistered vlan
exit
show mac address-table
multicast [vlan
mac-multicast-
[address
address ip-multicast-
|
address
] [format ip |
mac]]
show mac address-table
vlan-id
filtering
726
Configuring L2 Multicast Features
Purpose
Forbid adding a specific Multicast address to specific ports.
mac-multicast-address
•
format xxxx.xxxx.xxxx.
ip- multicast-address
•
}
• add — Adds ports to the group. If no option is specified,
this is the default option.
• remove — Removes ports from the group.
interface-list
•
channel, tengigabitethernet) and number. Separate
nonconsecutive interfaces with a comma and no spaces;
use a hyphen to designate a range of ports.
Prevent the switch from forwarding traffic with
unregistered multicast addresses on the specified VLAN.
This command sets the forwarding mode to Filter
Unregistered.
Allow the switch to forward all multicast packets on the
specified VLAN.
Allow the switch to forward packets with unregistered
multicast addresses on the specified VLAN.
vlan-id
NOTE:
Do not use the mac address-table multicast
forbidden forward-unregistered command with the mac
address-table multicast forward-unregistered command on
the same interface.
Exit to Privileged EXEC mode.
View entries in the multicast MAC address table.
vlan-id
]
View the multicast filtering configuration information for
the specified VLAN.
— MAC multicast address in the
— IP multicast address.
— Specifies the interface type (port-