Configuring Vlans Using Dell Openmanage Administrator - Dell PowerConnect 8024 User Configuration Manual

Configuring VLANs Using Dell OpenManage Administrator

This example shows how to perform the configuration by using the web-
based interface.
Configure the VLANs and Ports on Switch 1
Use the following steps to configure the VLANs and ports on Switch 1. None
of the hosts that connect to Switch 1 use the Engineering VLAN (VLAN
100), so it is not necessary to create it on that switch.
To configure Switch 1:
1 Create the Marketing, Sales, and Payroll VLANs.
From the Switching → VLAN → VLAN Membership page, click Add.
a
In the VLAN ID field, enter 200.
b
In the VLAN Name field, enter Marketing.
c
Click Apply.
d
Figure 22-27. Add VLANs
Repeat steps b–d to create VLANs 300 (Sales) and 400 (Payroll).
e
2 Assign ports 16–20 to the Marketing VLAN.
From the Switching → VLAN → VLAN Membership page, select
a
200-Marketing from the Show VLAN field.
In the Static row, click the space for ports 16–20 so the U (untagged)
b
displays for each port.
592
Configuring VLANs