Figure 22-1. Simple VLAN Topology
Engineering
VLAN 100
In this example, each port is manually configured so that the end station
attached to the port is a member of the VLAN configured for the port. The
VLAN membership for this network is port-based or static.
PowerConnect 8000-series and 8100-series switches also support VLAN
assignment based on any of the following criteria:
•
MAC address of the end station
•
IP subnet of the end station
•
Protocol of the packet transmitted by the end station
Tech Pubs
VLAN 200
Router
Switch
Configuring VLANs
Payroll
VLAN 300
541
Need help?
Do you have a question about the PowerConnect 8024 and is the answer not in the manual?
Questions and answers