Default Idsp And Lldp Values - Dell PowerConnect 8024 User Configuration Manual

Default IDSP and LLDP Values

ISDP and LLDP are globally enabled on the switch and enabled on all ports
by default. By default, the switch transmits and receives LLDP information
on all ports. LLDP-MED is disabled on all ports.
Table 24-1 summarizes the default values for ISDP .
Table 24-1. ISDP Defaults
Parameter
ISDP Mode
ISDPv2 Mode
Message Interval
Hold Time Interval
Device ID
Device ID Format Capability
Device ID Format
Table 24-2 summarizes the default values for LLDP .
Table 24-2. LLDP Defaults
Parameter
Transmit Mode
Receive Mode
Transmit Interval
Hold Multiplier
Reinitialization Delay
Notification Interval
Transmit Management Information
Notification Mode
Included TLVs
Default Value
Enabled (globally and on all ports)
Enabled (globally and on all ports)
30 seconds
180 seconds
none
Serial Number, Host Name
Serial Number
Default Value
Enabled on all ports
Enabled on all ports
30 seconds
4
2 seconds
5 seconds
Disabled
Disabled
None
Discovering Network Devices
639