Configuring Static Lags - Dell PowerConnect 8024 User Configuration Manual

Configuring Static LAGs

The commands in this example show how to configure a static LAG on a
switch. The LAG number is 2, and the member ports are 10, 11, 14, and 17.
To configure the switch:
1 Enter interface configuration mode for the ports that are to be configured
as LAG members.
console(config)#interface range te1/0/10-12,
te1/0/14,te1/0/17
2 Add the ports to LAG 2 without LACP.
console(config-if)#channel-group 2 mode on
3 View information about LAG 2.
console#show interfaces port-channel 2
Channel Ports
------- -----------------
Po2
798
Configuring Link Aggregation
Inactive: Te1/0/10,
Te1/0/11, Te1/0/12,
Te1/0/14, Te1/0/17
Hash Algorithm Ch-Type min-links
-------------- ------- ---------
3 Static 1