Dell PowerConnect 8024 User Configuration Manual page 496

Configuring Port Security Configuration (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the IEEE 802.1X
features and Port Security on a PowerConnect 8000-series and 8100-series
switches. For details about the fields on a page, click
page.
Port Security
Use the Port Security page to enable MAC locking on a per-port basis. When
a port is locked, you can limit the number of source MAC addresses that are
allowed to transmit traffic on the port.
To display the Port Security page, click Switching → Network Security → Port
Security in the navigation panel.
Figure 20-11. Network Security Port Security
Configuring Port Security Settings on Multiple Ports
To configure port security on multiple ports:
1 Open the Port Security page.
2 Click Show All to display the Port Security Table page.
496
Configuring Port and System Security
at the top of the