Dell PowerConnect 8024 User Configuration Manual page 818

Workgroup
Cluster
To configure FIP snooping:
1 Enter global configuration mode and enable FIP snooping on the switch.
console#configure
console(config)#feature fip-snooping
2 Create VLAN 100. This command also enters the VLAN configuration
mode for VLAN 100.
console(config)#vlan 100
console(config-vlan100)#fip-snooping enable
console(config-vlan100)#exit
3 Enter Interface Configuration mode for ports 1, 2, 3, 16, and 17 on both
switches in the stack.
console(config)#interface range te1/0/1-
3,te1/0/16-17,te2/0/1-3,te2/0/16-17
4 Enable VLAN tagging to allow the ports to carry 802.1p priority values
through the network.
console(config-if)#switchport mode general
console(config-if)#switchport general allowed vlan
add 100 tagged
818
Configuring Data Center Bridging Features
PowerConnect
Switch
Internet
FCF Switch
FCF Switch
FC SAN
FC SAN