Dell PowerConnect 8024 User Configuration Manual page 984

Command
area-id
area virtual-link
neighbor-id
hello-interval
seconds
area-id
area virtual-link
neighbor-id
dead-interval
seconds
area-id
area virtual-link
neighbor-id
transmit-
seconds
delay
exit
exit
show ip ospf virtual-link
brief
984
Configuring OSPF and OSPFv3
Purpose
Set the OSPF hello interval for the virtual link.
seconds
The variable indicates the number of seconds to
wait before sending Hello packets from the virtual
interface. (Range: 1–65535).
Set the OSPF dead interval for the virtual link.
seconds
The variable indicates the number of seconds to
wait before the virtual interface is assumed to be dead.
(Range: 1–65535)
Set the OSPF Transit Delay for the interface.
seconds
The variable is the number of seconds to
increment the age of the LSA before sending, based on
the estimated time it takes to transmit from the
interface. (Range: 0–3600)
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View summary information about all virtual links
configured on the switch.