Enabling Isdp On A Port; Viewing And Clearing Isdp Information - Dell PowerConnect 8024 User Configuration Manual

Enabling ISDP on a Port

Beginning in Privileged EXEC mode, use the following commands to enable
ISDP on a port.
Command
configure
interface
interface
isdp enable
exit
exit
show isdp interface all

Viewing and Clearing ISDP Information

Beginning in Privileged EXEC mode, use the following commands to view
and clear the contents of the ISDP table and to view and clear ISDP statistics.
Command
show isdp entry {all |
deviceid
}
show isdp neighbors
clear isdp table
show isdp traffic
clear isdp counters
Purpose
Enter Global Configuration mode.
Enter interface configuration mode for the specified
interface.
Administratively enable ISDP on the switch.
Exit to Global Config mode.
Exit to Privileged Exec mode.
View the ISDP mode on all interfaces.
Purpose
View information about all entries or a specific entry in the
ISDP table.
View the neighboring devices discovered through ISDP .
Clear all entries, including discovered neighbors, from the
ISDP table.
View ISDP statistics.
Reset all ISDP statistics to zero.
Discovering Network Devices
657