Dell PowerConnect 8024 User Configuration Manual page 1052

7 Assign a virtual router ID to the VLAN routing interface for the second
VRRP group.
console(config-if-vlan10)#vrrp 20
8 Specify the IP address that the virtual router function will use.
console(config-if-vlan10)#vrrp 20 ip 192.168.10.2
9 Configure an optional description to help identify the VRRP group.
console(config-if-vlan10)#vrrp 20 description
backup
10 Enable the VRRP groups on the interface.
console(config-if-vlan10)#ip vrrp 10 mode
console(config-if-vlan10)#ip vrrp 20 mode
console(config-if-vlan10)#exit
console(config)#exit
The only difference between the Router A and Router B configurations is the
IP address assigned to VLAN 10. On Router B, the IP address of VLAN 10 is
192.168.10.2. Because this is also the virtual IP address of VRID 20, Router B
is the interface owner and VRRP master of VRRP group 20.
To configure Router B:
1 Enable routing for the switch.
console#config
console(config)#ip routing
2 Create and configure the VLAN routing interface to use as the default
gateway for network clients. This example assumes all other routing
interfaces, such as the interface to the external network, have been
configured.
console(config)#interface vlan 10
console(config-if-vlan10)#ip address 192.168.10.2
255.255.255.0
console(config-if-vlan10)#exit
3 Enable VRRP for the switch.
console(config)#ip vrrp
1052
Configuring VRRP