Stacking Features; High Port Count; Single Ip Management; Automatic Firmware Update For New Stack Members - Dell PowerConnect 8024 User Configuration Manual

Stacking Features

For information about creating and maintaining a stack of switches, see
"Managing a Switch Stack" on page 141.

High Port Count

You can stack PowerConnect 8000-series and 8100-series switches up to six
switches high, supporting up to 132 front-panel ports when two ports on each
unit are configured as stacking ports. The stack can contain any combination
of Power Connect 8024 and PowerConnect 8024F switches as long as all
switches are running the same firmware version.

Single IP Management

When multiple switches are connected together through the stack ports, they
operate as a single unit with a larger port count. The stack operates and is
managed as a single entity. One switch acts as the master, and the entire stack
is managed through the management interface (Web, CLI, or SNMP) of the
stack master.

Automatic Firmware Update for New Stack Members

By default, if a switch is added to a stack and the switch is running a different
backup version of firmware than the active version on the stack master, the
backup firmware on the new member is automatically updated to match the
stack master, the backup version of firmware on the new member is activated,
and the new member is rebooted.
58
Switch Features