Configuring Isdp And Lldp (Cli); Configuring Global Isdp Settings - Dell PowerConnect 8024 User Configuration Manual

Configuring ISDP and LLDP (CLI)

This section provides information about the commands you use to manage
and view the device discovery protocol features on the switch. For more
information about these commands, see the
8024/8024F/8132/8132F/8164/8164F CLI Reference Guide
support.dell.com/manuals.

Configuring Global ISDP Settings

Beginning in Privileged EXEC mode, use the following commands to
configure ISDP settings that affect the entire switch.
Command
configure
isdp enable
isdp advertise-v2
time
isdp holdtime
time
isdp timer
exit
show isdp
656
Discovering Network Devices
Purpose
Enter Global Configuration mode.
Administratively enable ISDP on the switch.
Allow the switch to send ISDPv2 packets.
Specify the number of seconds the device that receives
ISDP packets from the switch should store information
sent in the ISDP packet before discarding it.
Specify the number of seconds to wait between sending
new ISDP packets.
Exit to Privileged EXEC mode.
View global ISDP settings.
PowerConnect
at