Dell PowerConnect 8024 User Configuration Manual page 295

Command
snmp-server group
groupname
{v1 | v2 | v3
{noauth | auth | priv}
view-name
[notify
view-name
[context
view-name
[read ] [write
view-name
]
Purpose
Specify the identity string of the receiver and set the
receiver timeout value.
groupname
•
]}
1-30 characters.)
]
• v1 — Indicates the SNMP Version 1 security model.
• v2 — Indicates the SNMP Version 2 security model.
• v3 — Indicates the SNMP Version 3 security model.
• noauth — Indicates no authentication of a packet.
Applicable only to the SNMP Version 3 security model.
• auth — Indicates authentication of a packet without
encrypting it. Applicable only to the SNMP Version 3
security model.
• priv — Indicates authentication of a packet with
encryption. Applicable only to the SNMP Version 3
security model.
view-name
•
step) to use for the context, notification, read, and write
privileges for the group.
— Specifies the name of the group. (Range:
— Specifies the view (defined in the previous
Configuring SNMP
295