Configuring VLANs (CLI)
This section provides information about the commands you use to create and
configure VLANs. For more information about the commands, see the
PowerConnect 8024/8024F/8132/8132F/8164/8164F CLI Reference Guide
support.dell.com/manuals.
Creating a VLAN
Beginning in Privileged EXEC mode, use the following commands to
configure a VLAN and associate a name with the VLAN.
Command
configure
vlan-id
vlan-
vlan {
|
range
}
string
name
CTRL + Z
vlan-id
show vlan [id
vlan-name
name
576
Configuring VLANs
Purpose
Enter global configuration mode.
Create a new VLAN or a range of VLANs and enter the
interface configuration mode for the specified VLAN or
VLAN range.
vlan-id
•
vlan-range
•
separate, non-consecutive VLAN IDs separated by
commas (without spaces); use a hyphen to designate a
range of IDs. (Range: 2–4093)
NOTE:
You can also create with this command in VLAN
Database mode . To enter VLAN Database mode, use the vlan
database command in Global Configuration mode.
Add a name to the specified VLAN.
string
— Comment or description to help identify a
specific VLAN (Range: 1–32 characters).
Exit to Privileged EXEC mode.
|
Display VLAN information.
]
vlan-id
•
vlan-name
•
characters)
—A valid VLAN IDs (Range: 2–4093).
— A list of valid VLAN IDs to be added. List
— A valid VLAN ID. (Range: 1–4093)
— A valid VLAN name string. (Range: 1–32
at