Dell PowerConnect 8024 User Configuration Manual page 227

Command
logging
{buffered|console| file}
severity
[ ]
facility-
logging facility
type
CTRL + Z
show logging
show logging file
clear logging
Purpose
Enable logging to the specified file. Optionally, you can
define a logging discriminator to help filter log messages
and set the severity of the messages to log.
• buffered — Enables logging to the RAM file (cache). If
the switch resets, the buffered logs are cleared.
• console — Enables logging to the screen when you are
connected to the CLI through the console port.
• file — Enables logging to the startup and operational log
files on the flash.
disc-name
• discriminator
message discriminator to help filter log messages. The
disc-name
can contain up to eight alphanumeric
characters. Spaces are not permitted.
severity
• — (Optional) Enter the number or name of the
desired severity level. For information about severity
levels, see Table 11-1.
Set the facility for logging messages. Permitted
type
values are local0, local1, local2, local3, local4, local5,
local 6, local7
Exit to Privileged EXEC mode.
Displays the state of logging and the syslog messages
stored in the internal buffer.
View information about the flash (persistent) log file.
Use to clear messages from the logging buffer.
Monitoring and Logging System Information
— (Optional) Include a
facility-
227