Configuring Lldp - Dell PowerConnect 8024 User Configuration Manual

4 Exit to Privileged EXEC mode and view the LLDP settings for the switch
and for interface 1/0/3.
console(config-if-Te1/0/3)# <CTRL + Z>
console#show isdp
Timer....................................45
Hold Time................................60
Version 2 Advertisements.................Enabled
Neighbors table time since last change...00 days
Device ID................................none
Device ID format capability........ Serial Number,
Device ID format.................. Serial Number
console#show isdp interface te1/0/3
Interface
---------------
Te1/0/3

Configuring LLDP

This example shows how to configure LLDP settings for the switch and to
allow 10-Gigabit Ethernet port 1/0/3 to transmit all LLDP information
available.
To configure the switch:
1 Configure the transmission interval, hold multiplier, and reinitialization
delay for LLDP PDUs sent from the switch.
console#configure
console(config)#lldp timers interval 60 hold 5
reinit 3
2 Enable port 1/0/3 to transmit and receive LLDP PDUs.
console(config)#interface TengigabitEthernet1/0/3
console(config-if-Te1/0/3)#lldp transmit
console(config-if-Te1/0/3)#lldp receive
662
Discovering Network Devices
Mode
----------
Enabled
00:00:00
Host Name