Switch Addresses - Dell PowerConnect 8024 User Configuration Manual

Table 3-3. System LED Definitions—PowerConnect 8100-Series Switches
LED Color
System Blinking blue
Solid red
Blinking red
Temp Off
Solid amber
Diag Off
Blinking green
Fan Solid green
Solid red
Stack Solid green
Solid amber
Off
Locator Blinking green
Solid green

Switch Addresses

The switch allocates MAC addresses from the Vital Product Data information
stored locally in flash. MAC addresses are used as follows:
Table 3-4. MAC Address Use
Base
Base + 1
Base + 2
Base + 3
Definition
The switch is booting
A critical system error has occurred.
A noncritical system error occurred (fan or power
supply failure).
The switch is operating at normal temperature.
The thermal sensor's system temperature threshold of
75°C has been exceeded.
The switch is operating normally
A diagnostic test is running.
The fan is powered and is operating at the expected
RPM.
A fan failure has occurred.
The switch is in stacking master mode.
The switch is in stacking slave mode.
The switch is in stand-alone mode.
The locator function is enabled.
The locator function is disabled.
switch address
Out-of-band port
Layer 2
Layer 3
Hardware Overview
97