Konica Minolta bizhub C650 Service Manual page 1424

Field Service Ver. 2.0 Aug. 2007
D cutting
[1]
[2]
[3]
[3] [2]
[1]
4511F2C578DA
[2]
[5]
[4]
4511F2C577DA
[1]
4511F2C579DA
NOTE
• When installing the gear [1] to the
guide plate [2], insert the gear [1] at
an angle and use care not to break
the tabs [3].
• Install the gear and guide plate as
shown on the left.
15. Remove the screw [1].
16. Remove two C-rings [2] and remove
the crease roller A [3], B [4] and C
[5].
NOTE
• When mounting the crease roller
assy 2, mount it so that the gear [1]
for the crease roller 2 assy will be
over the gear for the cease roller 1
by one tooth.
4. Other
23