DN
REMOVAL AND INSTALLATION (Continued)
Fig. 21 Front Bearing Cup Removal
1 – REMOVER
2 – HANDLE
Fig. 22 Rear Bearing Cup Removal
1 – DRIVER
2 – HANDLE
(18) Remove the depth shims from the pinion
shaft. Record the thickness of the depth shims.
INSTALLATION
(1) Apply Mopar
Door Ease, or equivalent, stick
lubricant to outside surface of bearing cup.
Fig. 23 Collapsible Spacer
1 – COLLAPSIBLE SPACER
2 – SHOULDER
3 – PINION
4 – PINION DEPTH SHIM
5 – REAR BEARING
Fig. 24 Rear Bearing Removal
1 – SPECIAL TOOL C-293–PA
2 – VISE
3 – ADAPTERS
4 – DRIVE PINION GEAR SHAFT
C205F AXLE
3 - 43