2Nd Row Center Seat Cushion Cover; 2Nd Row Center Seat Cushion - Dodge 2000 DURANGO Service Manual

DN
REMOVAL AND INSTALLATION (Continued)
(3) Remove bolts attaching outboard tumble latch
to seat cushion frame.
(4) Remove bolts attaching inboard tumble latch to
seat cushion frame.
(5) Remove bolts attaching floor latch to seat cush-
ion frame (Fig. 11).
(6) Disengage latch cable from inboard tumble
latch.
(7) Separate latches from seat cushion frame.
Fig. 10 Seat J-Strap
1 – OUTBOARD TUMBLE LATCH
2 – SEAT CUSHION
3 – J-STRAP
Fig. 11 Floor Latch
1 – INBOARD TUMBLE LATCH
2 – FLOOR LATCH
INSTALLATION
(1) Position latches on seat cushion frame.
(2) Route latch cables through seat frame and
engage latch cable to inboard tumble latch.
(3) Install bolts attaching floor latch to seat cush-
ion frame (Fig. 11). Tighten bolts to 27 N·m (19 ft.
lbs.) torque.
(4) Install bolts attaching inboard tumble latch to
seat cushion frame. Tighten bolt located in round
hole first than bolt located in the slotted hole.
Tighten bolts to 27 N·m (19 ft. lbs.) torque
(5) Install bolts attaching outboard tumble latch to
seat cushion frame. Tighten bolt located in round
hole first than bolt located in the slotted hole.
Tighten bolts to 27 N·m (19 ft. lbs.) torque.
(6) Engage J-straps on seat cushion frame (Fig.
10).
(7) Install seat back.

2ND ROW CENTER SEAT CUSHION COVER

REMOVAL
(1) Remove seat back.
(2) From the underside of the seat cushion, disen-
gage the J-straps attaching the cover the seat cush-
ion frame.
(3) Separate cover from seat cushion.
INSTALLATION
(1) Position cover on seat cushion.
(2) From the underside of the seat cushion, engage
the J-straps attaching the cover the seat cushion
frame.
(3) Install seat back.

2ND ROW CENTER SEAT CUSHION

REMOVAL
(1) Remove 2nd row seat assembly.
(2) Remove outboard seats (Fig. 12).
Fig. 12 2nd Row Center Seat Cushion
1 – 2ND ROW CENTER SEAT CUSHION
BODY 23 - 15