Cowl Trim Cover; A-Pillar Grab Handle; A-Pillar Trim; Door Sill Trim - Dodge 2000 DURANGO Service Manual

23 - 52 BODY
REMOVAL AND INSTALLATION (Continued)
(3) Remove the carrier backing and press each
skid strip onto roof panel with a roller.
NOTE: Apply 3M Drip-Chek Sealant (or an equiva-
lent product) to side rail screw threads.
(4) Position luggage rack on roof.
(5) Install screws attaching side rail to roof panel
(Fig. 78).

COWL TRIM COVER

REMOVAL
(1) Using a trim stick, pry cowl trim cover from
cowl to disengage clips.
(2) Separate cowl trim cover from vehicle.
INSTALLATION
(1) Position cowl trim cover on cowl.
(2) Press cowl trim cover into place to engage clips.

A-PILLAR GRAB HANDLE

REMOVAL
(1) Using a small flat blade screw driver, pry trim
plugs from A-pillar grab handle.
(2) Remove screws attaching grab handle to A-pil-
lar.
(3) Separate A-pillar grab handle from vehicle.
INSTALLATION
(1) Position grab handle on A-pillar.
(2) Install screws attaching grab handle to A-pillar.
(3) Install trim plugs in A-pillar grab handle.

A-PILLAR TRIM

REMOVAL
(1) Remove A-pillar grab handle, if equipped.
(2) Remove screws from cowl trim cover.
(3) Remove cowl trim cover.
(4) Grasp A-pillar trim and pull outward to disen-
gage clips attaching A-pillar trim to A-pillar (Fig. 79).
(5) Separate A-pillar trim from vehicle.
INSTALLATION
(1) Position A-pillar trim at A-pillar, align clips
and press into place.
(2) Install cowl trim cover.
(3) Install A-pillar grab handle, if equipped.

DOOR SILL TRIM

REMOVAL
(1) Using a trim stick, pry up door sill trim.
(2) Grasp door sill trim and lift upward.
Fig. 79 A-Pillar Trim
1 – A-PILLAR TRIM
2 – GRAB HANDLE
3 – COWL TRIM COVER
(3) Separate door sill trim from vehicle (Fig. 80)
and (Fig. 81).
Fig. 80 Front Door Sill Trim
1 – FRONT DOOR SILL
2 – DOOR SILL TRIM
3 – GROMMET
INSTALLATION
(1) Position door sill trim on door sill.
(2) Press into place.
DN