Dodge 2000 DURANGO Service Manual page 16

0 - 4 LUBRICATION AND MAINTENANCE
SERVICE PROCEDURES (Continued)
45,000 Miles (72 000 km) or at 36 months
• Change engine oil.
• Replace engine oil filter.
• Lubricate
front
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Flush and replace engine coolant at 36 months,
regardless of mileage.
52,500 Miles (84 000 km) or at 42 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if not done at
36 months.
60,000 Miles (96 000 km) or at 48 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables (5.2L & 5.9L).
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Inspect auto tension drive belt and replace if
required (5.2L & 5.9L).
• Drain and refill automatic transmission fluid
and change filter (4.7L).
67,500 Miles (108 000 km) or at 54 months
• Change engine oil.
• Replace engine oil filter.
• Lubricate
front
required.
• Inspect front wheel bearings.
• Inspect brake linings.
75,000 Miles (120 000 km) or at 60 months
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).
• Drain and refill transfer case.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
• Inspect auto tension drive belt and replace if
required.
82,500 Miles (132 000 km) or at 66 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
suspension ball joints
suspension ball joints
90,000 Miles (144 000 km) or at 72 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
if
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Lubricate
front
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Inspect auto tension drive belt and replace if
required.
• Drain and refill automatic transmission fluid
and change filter (4.7L).
97,500 Miles (156 000 km) or at 78 months
• Change engine oil.
• Replace engine oil filter.
105,000 Miles (168 000 km) or at 84 months
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
• Inspect auto tension drive belt and replace if
required.
112,500 Miles (181 000 km) or at 90 months
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
if
Replace filter and adjust bands (5.2L & 5.9L).
• Drain and refill transfer case fluid.
• Lubricate
front
required.
• Inspect front wheel bearings.
• Inspect brake linings.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) or 24 months since last
change.
120,000 Miles (192 000 km) or at 96 months
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables (5.2L & 5.9L).
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Inspect auto tension drive belt and replace if
required.
• Drain and refill automatic transmission fluid
and change filter (4.7L).
*This maintenance is recommended by Chrysler
Corporation to the owner but is not required to main-
tain the warranty on the PCV valve.
suspension ball joints
suspension ball joints
DN
if
if