Dodge 2000 DURANGO Service Manual page 835

DN
REMOVAL AND INSTALLATION (Continued)
Fig. 14 Front Fender
1 – FRONT FENDER
2 – BRACKET
3 – U-NUT
4 – DASH PANEL
5 – U-NUT
(8) Remove powertrain control module.
(9) Disengage clips attaching wire harnesses to
inner fender and wheelhouse.
1 – U-NUT
2 – U-NUT
(10) Remove bolt attaching fender to lower rocker
panel.
(11) Remove bolts attaching fender to lower radia-
tor closure panel (Fig. 15).
(12) Remove bolts attaching fender to hood hinge
support bracket.
(13) Remove bolts attaching fender to upper cowl.
(14) Remove bolts attaching fender to upper radia-
tor closure panel.
(15) Separate fender and wheelhouse from vehicle.
INSTALLATION
(1) Position fender and wheelhouse from vehicle.
(2) Install bolts attaching fender to upper radiator
closure panel.
(3) Install bolts attaching fender to upper cowl.
(4) Install bolts attaching fender to hood hinge
support bracket.
(5) Install bolts attaching fender to lower radiator
closure panel.
(6) Install bolt attaching fender to lower rocker
panel.
(7) Position the wire harnesses on the inner fender
and wheelhouse and engage clips.
(8) Install powertrain control module.
(9) Install air cleaner element housing.
Fig. 15 Front Fender
3 – FRONT FENDER
4 – RADIATOR CLOSURE PANEL
BODY 23 - 27