Dodge 2000 DURANGO Service Manual page 18

0 - 6 LUBRICATION AND MAINTENANCE
SERVICE PROCEDURES (Continued)
48,000 Miles (77 000 km)
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
51,000 Miles (82 000 km)
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant.
54,000 Miles (86 000 km)
• Change engine oil.
• Replace engine oil filter.
57,000 Miles (91 000 km)
• Change engine oil.
• Replace engine oil filter.
60,000 Miles (96 000 km)
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables (5.2L & 5.9L).
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
• Inspect auto tension drive belt and replace if
required (5.2L & 5.9L).
63,000 Miles (101 000 km)
• Change engine oil.
• Replace engine oil filter.
66,000 Miles (106,000 km)
• Change engine oil.
• Replace engine oil filter.
• Inspect front wheel bearings.
• Lubricate
front
required.
69,000 Miles (110 000 km)
• Change engine oil.
• Replace engine oil filter.
suspension ball joints
72,000 Miles (115 000 km)
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
75,000 Miles (120 000 km)
• Change engine oil.
• Replace engine oil filter.
• Inspect engine air cleaner element, replace
as necessary.
• Drain and refill transfer case fluid.
• Inspect auto tension drive belt and replace if
required.
78,000 Miles (125 000 km)
• Change engine oil.
• Replace engine oil filter.
81,000 Miles (130 000 km)
• Change engine oil.
• Replace engine oil filter.
• Flush and replace engine coolant if it has been
30,000 miles (48 000 km) since last change.
84,000 Miles (134 000 km)
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
87,000 Miles (139 000 km)
• Change engine oil.
• Replace engine oil filter.
90,000 Miles (144 000 km)
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace spark plugs.
if
• Inspect PCV valve, replace as necessary.*
• Inspect front wheel bearings.
• Lubricate
front
required.
• Inspect auto tension drive belt and replace if
required.
suspension ball joints
DN
if