Dodge 2000 DURANGO Service Manual page 19

DN
SERVICE PROCEDURES (Continued)
93,000 Miles (149 000 km)
• Change engine oil.
• Replace engine oil filter.
96,000 Miles (154 000 km)
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
99,000 Miles (158 000 km)
• Change engine oil
• Replace engine oil filter.
102,000 Miles (163 000 km)
• Change engine oil.
• Replace engine oil filter.
105,000 Miles (168 000 km)
• Change engine oil.
• Replace engine oil filter.
• Inspect engine air cleaner element, replace
as necessary.
• Inspect auto tension drive belt and replace if
required.
108,000 Miles (173 000 km)
• Change engine oil.
• Replace engine oil filter.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
111,000 Miles (178 000 km)
• Change engine oil.
• Replace engine oil filter.
LUBRICATION AND MAINTENANCE
• Drain and refill transfer case fluid.
• Inspect front wheel bearings.
• Lubricate
front
required.
• Flush and replace engine coolant if it has been
30,00 miles (48 000 km) since last change.
114,000 Miles (182 000 km)
• Change engine oil.
• Replace engine oil filter.
117,000 Miles (187 000 km)
• Change engine oil.
• Replace engine oil filter.
120,000 Miles (192 000 km)
• Change engine oil.
• Replace engine oil filter.
• Replace engine air cleaner element.
• Replace ignition cables.
• Inspect PCV valve, replace as necessary.*
• Replace spark plugs.
• Drain and refill automatic transmission fluid.
Replace filter and adjust bands (5.2L & 5.9L).‡
• Drain and refill automatic transmission fluid
and change filter (4.7L).
• Change rear axle fluid.
• Change front axle fluid (4x4).
• Inspect brake linings.
• Inspect auto tension drive belt and replace if
required.
*This maintenance is recommended by Chrysler
Corporation to the customer but is not required to
maintain warranty on the PCV valve.
‡Prolonged operation with heavy loading, espe-
cially in hot weather, use of vehicle for off-the-high-
way operation, and trailer towing require the more
frequent transmission service indicated with a ‡ in
Schedule "B". Perform these services if the vehicle is
usually operated under these conditions.
Important: Inspection and service should also be
performed any time a malfunction is observed or sus-
pected.
suspension ball joints
0 - 7
if