Dodge 2000 DURANGO Service Manual page 842

23 - 34 BODY
REMOVAL AND INSTALLATION (Continued)
Fig. 31 Access Plug
1 – ACCESS PLUG
2 – DOOR
(3) Disengage lock cylinder to latch rod from the
lock cylinder.
(4) Using a small flat blade, pry lock cylinder
retaining clip from lock cylinder housing/outside han-
dle (Fig. 33).
(5) Push lock cylinder out of lock cylinder housing/
outside handle.
1 – OUTSIDE HANDLE
2 – LOCK CYLINDER TO LATCH ROD
3 – LOCK BUTTON TO LATCH ROD
1 – LOCK CYLINDER TO LATCH ROD
2 – STUD
3 – OUTSIDE HANDLE
4 – RETAINING CLIP
5 – STUD
6 – LOCK CYLINDER
7 – LOCK BUTTON ROD
Fig. 32 Outside Door Handle
4 – LATCH
5 – INSIDE HANDLE TO LATCH ROD
6 – OUTSIDE HANDLE TO LATCH ROD
Fig. 33 Lock Cylinder
DN