Dodge 2000 DURANGO Service Manual page 138

Hide thumbs Also See for 2000 DURANGO:

Table of Contents

8 1/4 AND 9 1/4 AXLE

DISASSEMBLY AND ASSEMBLY (Continued)

Fig. 61 Threaded Adapter Installation

1 – THREADED ADAPTER DISC 8139–1

3 – SLOT IN ADAPTER

4 – SCREWDRIVER

5 – DISC 8139–2

6 – THREADED ROD C-4487–2

Fig. 62 Tighten Belleville Spring Compressor Tool

1 – TORQUE WRENCH

2 – TOOL ASSEMBLED

3 – DIFFERENTIAL CASE

(12) Loosen the Forcing Screw C-4487-2 in small

increments until the clutch pack tension is relieved

and the differential case can be turned using Turning

Bar C-4487-4.

(13) Rotate differential case until the pinion gears

can be removed.

Fig. 63 Remove Pinion Gear Thrust Washer

1 – THRUST WASHER

2 – FEELER GAUGE

(14) Remove pinion gears from differential case.

Fig. 64 Pinion Gear Removal

1 – PINION GEARS

(15) Remove Forcing Screw C-4487-2, Step Plate

8139–2, and Threaded Adapter 8139-1.

(16) Remove top side gear, clutch pack retainer,

and clutch pack. Keep plates in correct order during

removal (Fig. 65).

(17) Remove differential case from Side Gear Hold-

ing Tool 8136. Remove side gear, clutch pack retainer,

Chapters

Table of Contents