Table of Contents
Advertisement
4 • Printing Options
Printing an Ad, Date, and Time Only (no meter stamp)
You may want to use this feature in conjunction with selecting the
"Received" envelope ad to time-stamp incoming mail or sensitive
documents.
1. Press Print Menu.
2. Press Page Down and select "Ad, Date & Time".
PRINT MENU
◄Ad, Date & Time
◄Omit day/date/other
◄Horiz. print pos.
3. The "Print Ad, Date & Time" screen ap pears.
•
If you have already an envelope ad set as part of your meter
stamp, that ad is listed on the display next to the "Ad" selec-
tion. If this is the correct ad, continue with step 4.
•
If you need to change the ad, or select one if none was
chosen, select "Ad", then select "Select an Ad". Choose an
ad from the list provided. You return to the "Print Ad, Date &
Time" screen.
4. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the ad,
time and date, and ejects the enve-
lope/tape sheet.
NOTE:
i
mail piece so the date and time
prints on a blank section of the
mail piece.
5. Select "Exit Ad Date & Time" when finished to return to the Home
screen.
4-8
Make sure you orient the
SV62214 Rev. A
Advertisement
Table of Contents
