Job Types; Printing Only A Graphic Ad - Pitney Bowes Connect+ 500W Operator's Manual

2. Select Reload job.The system reverts to the previously saved version of the job.

Job Types

When creating a new job, you can select from the following job types.
Select Seal only, no printing if you only want to seal the envelope and do NOT want to
l
apply postage.
Select Date correction when you need to print the correct date on a piece of mail that
l
already has postage printed on it.
Select Postage correction if you do not have the correct amount of postage on a piece of
l
mail.
Select Statement of Manifest to print an indicia as evidence of payment for certain types
l
of mailings and shipments (like multiple parcel shipments or bulk mailings using pre-prin-
ted permit envelopes).
Select Received date and time if you want to print the date or time on incoming mail for
l
record keeping.
Select if you only want to print a graphic, text message, or return address on the envel-
l
ope.
Select Permit if you want to print a permit on a piece of mail.
l
Select Count only if you want to count mail without printing postage.
l
Select Weigh-Rate-Count if you want to track the weight and rate of your mail pieces as
l
well as count mail without printing postage.
NOTE: The Count only and Weigh-Rate-Count job types are only available if your system
uses accounting.

Printing Only a Graphic Ad

You can create a job to print only non-postal elements like a graphic ad on a tape or envel-
ope. If you have already created an ad only job, open the job and begin running mail.
Follow the steps below to create an ad only job.
1. Select the Options button on the Run Mail screen.
2. Select Create a new job... and then select Graphic ad only.
SV62589 Rev. C
Connect+® Series Operator Guide
35