Sealing The Envelope Only, Bypass All Printing; Pitney Bowes Operator Guide August - Pitney Bowes SendPro C Operator's Manual

Quick start guide
1. Check the level of sealant in the moistener tank and add more if required.
2. When feeding an envelope, be sure to slide the envelope flap under the edge of the feed deck, so
the moistener can wet the flap.
Note: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.

Sealing the envelope only, bypass all printing

1. Tap Envelope Printing on the Home screen.
2. Tap Print Mode on the lower left side of the Envelope Printing mail screen. You may have to
swipe up on the screen to see this option.
Pitney Bowes Operator Guide August 2019 34