| Basic Management Tasks
C
4
HAPTER
Displaying Hardware/Software Versions
D
H
ISPLAYING
ARDWARE
P
ARAMETERS
These parameters are displayed:
System Description – Brief description of device type.
◆
System Object ID – MIB II object ID for switch's network
◆
management subsystem.
System Up Time – Length of time the management agent has been
◆
up.
System Name – Name assigned to the switch system.
◆
System Location – Specifies the system location.
◆
System Contact – Administrator responsible for the system.
◆
W
I
EB
NTERFACE
To configure general system information:
Click System, General.
1.
Specify the system name, location, and contact information for the
2.
system administrator.
Click Apply.
3.
Figure 3: System Information
/S
V
OFTWARE
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
◆
"System Management Commands" on page 697
– 120 –