Edge-Core ECS3510-28T Management Manual page 106

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Table 6: Switch Main Menu (Continued)
Menu
MSTP
Configure Global
Add
Modify
Show
Add Member
Show Member
Show Information
Configure Interface
Configure
Show Information
Traffic
Rate Limit
Storm Control
Auto Traffic Control
Configure Global
Configure Interface
Priority
Default Priority
Queue
Trust Mode
DSCP to DSCP
Add
Show
CoS to DSCP
Add
Show
PHB to Queue
Add
Show
DiffServ
Configure Class
Add
Description
Multiple Spanning Tree Algorithm
Configures initial VLAN and priority for an MST instance
Configures the priority or an MST instance
Configures global settings for an MST instance
Adds VLAN members for an MST instance
Adds or deletes VLAN members for an MST instance
Displays MSTP values used for the bridge
Configures interface settings for an MST instance
Displays interface settings for an MST instance
Sets the input and output rate limits for a port
Sets the broadcast storm threshold for each interface
Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
Sets the time to apply the control response after traffic has
exceeded the upper threshold, and the time to release the control
response after traffic has fallen beneath the lower threshold
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a
response of rate limiting, or to send related SNMP trap messages
Sets the default priority for each port or trunk
Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
Selects DSCP or CoS priority processing
Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
Shows the DSCP to DSCP mapping list
Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
Shows the CoS to DSCP mapping list
Maps internal per-hop behavior values to hardware queues
Shows the PHB to Queue mapping list
Creates a class map for a type of traffic
– 106 –
Page
253
253
253
253
253
253
253
257
257
257
259
260
262
264
265
269
270
276
277
277
277
279
279
279
273
273
273
283
284
284