A
T
G
BOUT
HIS
UIDE
R
H
EVISION
ISTORY
This section summarizes the changes in each revision of this guide.
D
2013 R
ECEMBER
EVISION
This is the fourth version of this guide. This guide is valid for software
release v1.4.0.0. It includes information on the following changes:
Updated information on the length of cable which can be accurately
◆
tested with cable diagnostics under
page 170
and
"test cable-diagnostics" on page
D
2013 R
ECEMBER
EVISION
This is the third version of this guide. This guide is valid for software
release v1.4.0.0. It includes information on the following changes:
Updated range for parameters under
◆
page
146.
◆
Removed symmetric parameter under
page
152.
Added
"Displaying Transceiver Data" on page 166
◆
Transceiver Thresholds" on page
Added
"Configuring Load Balancing" on page
◆
◆
Added
"Configuring MAC Address Learning" on page
Updated
Table 31, "Supported Notification Messages," on page
◆
Added information for Command Usage under
◆
Clustering," on page
Added new parameters under
◆
page
561.
Updated range of Forwarding Priority under
◆
Snooping and Query Parameters" on page
Updated parameter list under
◆
Multicast Router" on page
Added Multicast Data Drop parameter under
◆
Packets and Multicast Data" on page
Updated range of Forwarding Priority under
◆
Settings" on page
644.
◆
Added
"mac-learning" on page
Added
"port security mac-address-as-permanent" on page
◆
Added
"ip dhcp snooping limit rate" on page
◆
Added
"clear ip dhcp snooping database flash" on page
◆
– 6 –
"Performing Cable Diagnostics" on
"Resetting the System" on
"Configuring by Port List" on
167.
482.
"Using the Trace Route Function" on
"Configuring IGMP
608.
"Specifying Static Interfaces for a
612.
621.
"Configuring MVR Domain
866.
990.
and
"Configuring
185.
227.
453.
Table , "Switch
"Filtering IGMP Query
869.
896.
900.