Displaying Hardware/Software Versions; Figure 3: System Information - Edge-Core ECS4210-12P Web Management Manual

Displaying Hardware/Software Versions

Figure 3: System Information

Use the System > Switch page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Parameters
The following parameters are displayed:
Main Board Information
◆
Serial Number – The serial number of the switch.
◆
Number of Ports – Number of built-in ports.
◆
Hardware Version – Hardware version of the main board.
◆
Internal Power Status – Displays the status of the internal power supply.
Management Software Information
◆
Role – Shows that this switch is operating as Master or Slave.
◆
EPLD Version – Version number of Erasable Programmable Logic Device.
◆
Loader Version – Version number of loader code.
◆
Diagnostics Code Version – Version of Power-On Self-Test (POST) and boot
code.
◆
Operation Code Version – Version number of runtime code.
Chapter 3
Displaying Hardware/Software Versions
– 67 –
| Basic Management Tasks