How To Remove The Fan Tray Assembly - Sun Microsystems Enterprise 250 Owner's Manual

How to Remove the Fan Tray Assembly

Before You Begin
Complete these tasks:
4 "How to Power Off the System" on page 55
4 "How to Remove the Side Access Panel" on page 60
4 "How to Avoid Electrostatic Discharge" on page 64
What to Do
1. Disconnect the fan tray cable from the fan tray assembly.
Press the tab to release the connector.
Figure 8–1
2. Deflect the tab that secures the fan tray in the upper guide.
3. Slide the fan tray out of the system.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
150