Sun Microsystems Enterprise 250 Owner's Manual page 196

This connector is located in the upper-left corner of the backplane (as viewed
from the rear). Reach in through the side of the chassis to make the connection.
Figure 8–12
What Next
To reassemble the system, complete these tasks:
4 "How to Install the Fan Tray Assembly" on page 151
4 "How to Install the Side Access Panel" on page 62
When you are ready to restart the system, be sure to run POST and OpenBoot
Diagnostic tests to verify that the system functions correctly with the new parts you
have just installed. For additional information, see Chapter 12.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
162