Sun Microsystems Enterprise 250 Owner's Manual page 154

How to Install the SSP Paddle Card
Video Demonstration
Figure 6–17
Click on the icon above for a video demonstration.
Click here for Appendix E.
What to Do
1. Connect the SSP data cable to the main logic board at connector J4201.
a. Lift the collar on the SSP cable connector.
b. Insert the cable into the connector so that the cable's exposed contacts are
c. Press down on each side of the collar to secure the cable in the connector.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
120
facing away from the system rear panel.