Sun Microsystems Enterprise 250 Owner's Manual page 166

How to Install the Removable
Media Assembly (RMA)
Video Demonstration
Figure 7–5
Click on the icon above for a video demonstration.
Click here for Appendix E.
What to Do
1. Install the appropriate metal filler panel into any empty RMA drive bay
opening.
Align the two metal retainer clips in the front of the drive bay, and press the filler
panel into place.
2. Grasp any cables attached to the rear of the removable media devices and feed
them into the RMA opening at the front of the chassis.
Hold the removable media assembly in one hand and use the other hand to feed
the cables into the opening.
3. Slide the removable media assembly into the system chassis.
Make sure that the cables are not caught between the removable media assembly
and the chassis as you slide the assembly into the chassis.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
132