Sun Microsystems Enterprise 250 Owner's Manual page 168

5. If necessary, install one or more plastic filler panels in any empty drive bay
openings in the RMA plastic cover.
Align the filler panel with its opening and press it into place.
6. Replace the RMA plastic cover.
Align the two posts on the cover with the corresponding holes at the front of the
chassis and press the cover evenly on both sides until it snaps into place.
7. Connect the removable media SCSI cable to the UltraSCSI backplane
at connector J0501.
Each connector is keyed so that it connects in only one way.
8. If applicable, connect the diskette data cable to the SCSI backplane at
connector J0502.
9. Connect the removable media power cable to the UltraSCSI backplane at
connector J0104.
Figure 7–8
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
134