Sun Microsystems Enterprise 250 Owner's Manual page 209

4 "How to Power Off the System" on page 55
What to Do
1. Carefully turn the system chassis upside down.
Enlist the help of another person to accomplish this safely.
Do not lift the chassis using the plastic panels at the front or the side of the
chassis. Place the system onto a solid surface that spaces the unit about 2 inches
(5 cm) off the floor; for example, use a pair of wooden boards. Do not allow any
of the weight to rest on the plastic panels at the front of the chassis.
2. Remove the four plastic foot glides from the underside of the chassis.
Remove the Phillips screw at the center of each foot glide.
Note - Do not remove the two foot glide mounting brackets unless you are
converting the chassis to a rackmount configuration.
Figure 8–21
Removing and Installing Miscellaneous Assemblies
175