Sun Microsystems Enterprise 250 Owner's Manual page 198

Figure 8–13
3. Remove the plastic outer panel that partially covers the top of the chassis:
Only the top portion of the panel must be removed.
a. Using a flat-blade screwdriver as a lever, carefully flex the panel as shown
b. Slide the panel toward the rear of the system until the hooks beneath the
c. Pull the bottom center edge of the panel outward until it disengages from
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
164
below to disengage it from the chassis.
panel are disengaged from the chassis.
the chassis.
Lift the panel off the system and set it aside.