Sun Microsystems Enterprise 250 Owner's Manual page 175

Figure 7–13
3. Slide the drive out the front of its bay in the removable media assembly.
Push the drive from the rear to start the removal process.
4. Place the drive on an antistatic mat.
What Next
To replace the CD-ROM or tape drive, complete this task:
4 "How to Install a CD-ROM Drive or Tape Drive" on page 141
How to Install a CD-ROM Drive or
Tape Drive
Before You Begin
Know the configuration guidelines for installing removable media devices, see:
4 "About the SCSI Removable Media Bays and the External SCSI Port" on page 95
Complete these tasks:
4 "How to Power Off the System" on page 55
4 "How to Remove the Side Access Panel" on page 60
4 "How to Avoid Electrostatic Discharge" on page 64
141
Removing and Installing Storage Devices