How To Initiate A Reconfiguration Boot; Before You Begin - Sun Microsystems Enterprise 250 Owner's Manual

Figure 4–2
Note -
video is displayed on the system monitor or the ok prompt appears on an
attached terminal. This time depends on the level of power-on self-test (POST)
diagnostics being performed.
How to Initiate a Reconfiguration Boot

Before You Begin

After installing any new part that plugs into the main logic board or any internal or
external storage device, you must perform a reconfiguration boot so that your system
is able to recognize the newly installed option(s).
Caution -
all plastic outer panels and doors are properly installed.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
58
The system may take anywhere from 30 seconds to two minutes before
Before you power on the system, make sure that the side access panel and