Sun Microsystems Enterprise 250 Owner's Manual page 163

Figure 7–2
2. Disconnect the removable media power cable from the UltraSCSI backplane at
connector J0104.
3. Disconnect the removable media SCSI cable from the top of the UltraSCSI
backplane at connector J0501.
Leave all other cabling connected to the rear of the drives in the removable media
assembly.
4. At the front of the system, pull off the plastic cover from the front of the
removable media assembly.
Grasp the cover on both sides, and pull it away from the front of the system.
5. Loosen the two captive Phillips screws securing the removable media assembly
to the chassis.
Removing and Installing Storage Devices
129