Modifications To Equipment; Placement Of A Sun Product; Selv Compliance - Sun Microsystems Enterprise 250 Owner's Manual

TABLE C–1
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Sun
Microsystems is not responsible for regulatory compliance of a modified Sun product.

Placement of a Sun Product

Caution -
place a Sun product near a radiator or heat register. Failure to follow these guidelines
can cause overheating and affect the reliability of your Sun product.

SELV Compliance

Safety status of I/O connections comply to SELV requirements.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
298
Caution – There is risk of
personal injury and
equipment damage. Follow
the instructions.
Caution – Hot surface. Avoid
contact. Surfaces are hot and
may cause personal injury if
touched.
Caution – Hazardous
voltages are present. To
reduce the risk of electric
shock and danger to
personal health, follow the
instructions.
Caution – Do not block or cover the openings of your Sun product. Never
On – Applies AC power to
the system.
Off – Removes AC power
from the system.
Standby - The On/Standby
switch is in the standby
position.