Sun Microsystems Enterprise 250 Owner's Manual page 192

b. Disconnect the LED ribbon cable from connector J0602 at the front of the
2. Detach the LED ribbon cable from the underside of the removable media shelf.
Note -
the underside of the removable media shelf with double-sided adhesive tape.
Carefully pull the cable downward to detach it from the shelf. Reach in through
the side of the chassis or open the disk access door for better access to the cable.
Figure 8–8
3. Pull off the RMA plastic cover from the front of the removable media assembly.
Grasp both sides of the cover and pull it away from the front of the system.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
158
UltraSCSI backplane.
This connector is located in the upper-left corner of the backplane (as viewed
from the front). Lift the thin collar at the top of the connector to disconnect the
cable. Take note of how the cable is routed.
At the front-left corner of the system, the LED ribbon cable is secured to