Sun Microsystems Enterprise 250 Owner's Manual page 214

4 "How to Remove the Removable Media Assembly (RMA)" on page 128
4 "How to Remove a Disk Drive" on page 135
4 "How to Remove the Disk Cage Assembly" on page 163
Note -
the disk slot number associated with each drive. Later, when you reinstall the disk
drives, it is important to return each drive to its original location.
What to Do
1. Remove the two screws that secure the cage center divider to the disk cage.
Orient the cage so that the back is facing you. Remove the two screws that are
located in the middle of the back.
2. From the front of the disk cage, slide the center divider half way out of the cage.
Figure 9–1
3. Free the backplane from the six posts that support it at the rear of the disk cage.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
180
You must remove all disk drives from the disk cage assembly. Be sure to note