Sun Microsystems Enterprise 250 Owner's Manual page 298

Bank
----
SYS
=================================
Power Supplies:
---------------
Supply
------
0
========================= HW Revisions =========================
ASIC Revisions:
---------------
STP2223BGA: Rev 4
STP2003QFP: Rev 1
System PROM revisions:
----------------------
OBP 3.5.145 1997/10/15 14:50
OBP show-devs Command
If you are working from the OBP prompt (ok), you can use the OBP show-devs
command to list the devices in the system configuration.
OBP printenv Command
Use the OBP printenv command to display the OpenBoot PROM configuration
variables stored in the system NVRAM. The display includes the current values for
these variables as well as the default values.
OBP probe-scsi and probe-scsi-all Commands
To diagnose problems with the SCSI subsystem, you can use the OBP probe-scsi
and probe-scsi-all commands. Both commands require that you halt the system.
Note -
alternate method of testing the SCSI interfaces. See "About Diagnostic Tools" on
page 234 for more information.
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
264
Speed Status
(0-255)
----- ------
140 OK
Status
------
OK
When it is not practical to halt the system, you can use SunVTS as an
POST 5.0.5 1997/10/09 16:52