What Next; How To Remove The Side Access Panel; Before You Begin; Video Demonstration - Sun Microsystems Enterprise 250 Owner's Manual

recognized by the system. After the reconfiguration reboot has successfully
completed, the system prompt should be displayed.
Caution -
catastrophic disk drive failure. Always power off the system before moving it.

What Next

The system's front panel LED indicators provide power-on status information.
For more information about the system LEDs, see:
4 "About the Status and Control Panel" on page 6.

How to Remove the Side Access Panel

Caution -
are removed.
Caution -
the system power interlock switches. This safety mechanism prevents all DC voltages
(except 5V standby power) from reaching any internal component when the side
panel or removable media assembly is removed and the front panel keyswitch is left
on. Do not remove the side access panel or removable media assembly while the
system is operating or the system will power off abruptly.

Before You Begin

Complete this task:
4 "How to Power Off the System" on page 55

Video Demonstration

Figure 4–3
Sun Enterprise 250 Server Owner's Guide ♦ Revision A, June 1998
60
Never move the system when system power is on. Movement can cause
Do not operate the system while any of its plastic outer panels or doors
Removing the side access panel or removable media assembly activates